Eneo DMR-104 Instruções de Operação descarregar pdf (Página 32)

User’s Manual

Highlight the box under the Settings heading and press the

button to define the recording settings.

Figure 15 : Schedule – Settings (Advanced Mode) setup screen.

You can set the ips, Quality and Resolution (ips, Quality, Resolution and Dwell for Advanced Mode setup) of the recording

for any modes you set up in the Mode column. If you do not set the ips, Quality, Resolution and Dwell in the Settings

column, the DVR will follow the default settings. See below for details.

NOTE: Descriptions of the Record icons in the Type column are as follows:

Time-lapse (Time) Alarm-In Motion

Video Loss Video Blind Text-In

Channels that are not defined will use the setting values of the previous schedule item.

NOTE: When multiple events are detected at the same time from a specific channel, the DVR will record event

video with the high setting values if the ips, Quality, Resolution and Dwell values of events are different

from each other. However, the ips will be reset to the supported maximum value when the ips, Quality,

Resolution and Dwell are all set to the highest value. (Advanced Mode Only)

Highlight the box under the heading and press the

button to delete the recording settings. You will be asked to

confirm that you want to delete the settings.

Highlight Default… and press the

button. The Default screen appears.

Highlighting boxes under ips and pressing the button allows you to set the images per second for Time and Event

recording. You can select from 1.00 to 30.00 ips (25.00 ips PAL).

Highlighting boxes under Quality and pressing the button allows you to set the recorded image quality for Time

and Event recording. You can select from: Very High, High, Standard and Basic.

Highlighting boxes under Resolution and pressing the button allows you to set the recorded image resolution for

Time and Event recording. You can select from: Very High (D1), High (Half D1) and Standard (CIF).

Highlighting boxes under Dwell and pressing the button allows you to set the length of time you would like to record

for the associated event. (Advanced Mode Only)

1 2 ... 27 28 29 30 31 32 33 34 35 36 37 ... 87 88

Sem comentários

Eneo DMR-104 Instruções de Operação Página 32