Eneo DMR-104 Instruções de Operação descarregar pdf (Página 58)

User’s Manual

Live Monitoring Menu

Selecting

(Login) in the Live Monitoring menu accesses the Login screen, and you will be asked to select a User

and enter the password to log into the system. Selecting

(Logout) in the Live Monitoring menu displays the Logout

screen asking you to confirm whether or not you want to log out the current user.

Monitor

Selecting

(Monitor) in the Live Monitoring menu will allow you to select the monitor between Primary, Secondary

and Spot. It is the same as pressing the

MONITOR button. Selecting Primary displays , Secondary displays

and Spot displays . You can select the screen format and sequence monitoring of the selected monitor.

Display

y Camera: Selecting

(Display) → Camera and choosing the camera number displays the selected camera full

screen. It is the same as pressing the individual camera buttons on the front panel or clicking the left mouse button

on a camera image when in one of the multiview formats (i.e., 2x2, 3x2, 3x3, 4x3 or 4x4). Clicking the left mouse

button on the screen again returns to the previous display mode.

y Screen Format: Selecting

(Display) → Screen Format and choosing the screen mode displays the cameras

in the selected multiview screen mode (2x2, 3x2, 3x3, 4x3 or 4x4). Selecting each display mode is the same as

pressing the

DISPLAY button or scrolling the mouse wheel up and down when in one of the multiview formats.

y Previous Group, Next Group: Selecting

(Display) → Previous Group or Next Group moves to the previous

or next page.

y Edit Group: Selecting

(Display) → Edit Group enters to the Active Cameo mode. It is the same as pressing

the

button in any multiview formats. Refer to the following Active Cameo Mode section for details.

y Camera OSD, Status OSD: Selecting

(Display) → Camera OSD or Status OSD toggles Camera OSD

or Status OSD On and Off.

Freeze

Selecting

(Freeze) in the Live Monitoring menu will freeze the current image on the screen until you select again.

It is the same as pressing the

FREEZE button. While in the Freeze mode, the icon displays in bottom-left corner if

Freeze is selected in the Display setup screen (OSD tab).

Alarm

Selecting

(Alarm) in the Live Monitoring menu resets the DVR’s outputs including the internal buzzer during an

alarm. It is the same as pressing the

ALARM button.

Panic

Selecting

(Panic) in the Live Monitoring menu starts panic recording of all cameras, and selecting again stops

panic recording. It is the same as pressing the

PANIC button.

Sequence

Selecting

(Sequence) in the Live Monitoring menu causes the cameras to display sequentially. It is the same as

pressing the

SEQUENCE button on the remote control. When in one of the multi-view formats, selecting (Sequence)

will cause the DVR to go through predefined screen layouts (Full Sequence). Or, the bottom, right screen will display

live cameras sequentially (Cameo Sequence). For example, if you select

(Sequence) in the 2x2 format, the DVR

changes pages as follows:

1 2 ... 53 54 55 56 57 58 59 60 61 62 63 ... 87 88

Comentários a estes Manuais

Sem comentários

Eneo DMR-104 Instruções de Operação Página 58

Comentários a estes Manuais

Manuais e produtos relacionados com Gravadores de vídeo digitais (DVR) Eneo DMR-104