Eneo DMR-104 Instruções de Operação descarregar pdf (Página 56)

User’s Manual

NOTE: You will only be able to set up PTZ devices if the PTZ port is set to RS232 or RS485.

Highlight the box in the Product column for the PTZ camera you wish to configure

and press the

button. A list of PTZ devices appears. Select your camera

from the list and press the

button. You will need to connect the camera to

the RS232 or RS485 connector on the back of the DVR following the camera

manufacturer’s instructions.

You can assign IDs to each camera by highlighting the box under the ID heading and pressing the button. Change

the number by highlighting it and using the Up and Down arrow buttons to increase and decrease the number. The

PTZ ID number can be set from 0 to 256.

Highlight the Setup… box and press the button. The Port Setup window appears.

Configure the port’s setting based on the PTZ camera manufacturer’s instructions.

1 2 ... 51 52 53 54 55 56 57 58 59 60 61 ... 87 88

Sem comentários

Eneo DMR-104 Instruções de Operação Página 56